DC surge protection outdoor 600v solar surge protection device dc surge arrester

Solar energy generator arrester prevents high voltage surge, photovoltaic current limiting switch circuit breaker.

Product Details

Photovoltaic DC surge protector is a lightning protection product designed for the solar photovoltaic system based on the relevant standards. It is an electronic device that provides safety protection for solar photovoltaic devices. When the peak current or voltage is suddenly produced in the electrical circuit or communication line because of the external interference, the surge protector can guide the shunt in very short time, thus avoiding the damage of the surge to other equipment in the circuit. The lightning protector uses the multilevel protection circuit, selects the brand components and uses the advanced production technology. It has the characteristics of large flow capacity, low residual pressure level, sensitive reaction, stable performance, reliable work and so on.

Product features

1. equipped with high voltage DC fuse and circuit breaker, two level safety protection device.

2. the protection level is up to IP65, which meets the requirements of outdoor installation.

3. installation and maintenance is simple, convenient and long service life.

4. beautiful appearance, fine work

Product specification

Working principle of product

In the solar photovoltaic system, the inductive or capacitive coupling voltage is caused by the lightning shock and the switching operation of the upstream power supply system. Therefore, the surge may damage the photovoltaic modules and inverters, which will cause serious consequences for the operation of the photovoltaic system. The photovoltaic lightning arrester is specially developed for this purpose. The lightning protection module of the DC power supply, once the high voltage, and endanger the insulation of the protected equipment, the lightning arrester acts immediately, and the high voltage impact current is directed to the earth, thus limiting the amplitude of the voltage and protecting the insulation of the equipment. When the overvoltage is gone, the arrester is restored to its original state quickly, so as to protect the power equipment.

Use of attention

1. connect the positive and negative pole and the ground wire to the positive and negative poles and the earth terminals of the lightning protector respectively, and screw the terminals. Connect the grounding wire and the lightning protection system reliably. When the wiring is completed, check the wiring is correct and firm, then switch on the power supply and put it into operation. Before installing the lightning protection module, we must cut off the power supply, and no live operation is strictly prohibited.

2. it is recommended to fuse fuse or automatic circuit breaker at the front end of DC power supply lightning protection module.

3. this product does not need special maintenance at ordinary times. It only needs to check regularly whether the connection is loose and whether the working state is normal.

Company profile

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.