Solar surge protector device 1200v dc lightning arrester spd solar

Lightning protection and overvoltage surge protector for Torr solar energy lightning protection device

Product description​

Photovoltaic DC surge protector is a lightning protection product designed for the solar photovoltaic system based on the relevant standards. It has high lightning discharge capability, and the maximum discharge current of each module reaches 10KA. The lightning protector uses the multilevel protection circuit, selects the brand components and uses the advanced production technology. It has the characteristics of large flow capacity, low residual pressure level, sensitive reaction, stable performance, reliable work and so on.

Use of attention

1. connect the grounding wire of the lightning protector to the ground wire of the lightning protection system.

2. Surge protector is installed with 35MM standard guide rail

3. determine the discharge current path

4. lightning arrester must be reliably connected to the ground wire of the lightning protection system, and the connection line is short, thick and straight.

Product features

1. the protection flow is large, the residual pressure is very low, and the response time is fast.

2. with the power status indication, it indicates the working state of surge protector.

3. it can access multi-channel solar array at the same time. The maximum current per channel can reach 11A, which can meet different user needs.

4. thunderbolt counting function, easy to understand the invasion and frequency of lightning disasters.

Product specification

Working principle of product

In the solar photovoltaic system, the inductive or capacitive coupling voltage is caused by the lightning shock and the switching operation of the upstream power supply system. Therefore, the surge may damage the photovoltaic modules and inverters, which will cause serious consequences for the operation of the photovoltaic system. The photovoltaic lightning arrester is specially developed for this purpose. The lightning protection module of the DC power supply, once the high voltage, and endanger the insulation of the protected equipment, the lightning arrester acts immediately, and the high voltage impact current is directed to the earth, thus limiting the amplitude of the voltage and protecting the insulation of the equipment. When the overvoltage is gone, the arrester is restored to its original state quickly, so as to protect the power equipment.

Company profile

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.Thor has been designing new products to meet the RoHS directive since 2006.
we ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.