Lube Oil Testing Equipment Petroleum Products Copper Corrosion Degree Tester
|
Product Description: Lube Oil Testing Equipment is an advanced device used for testing the apparent viscosity of engine oil. It is suitable for testing the low temperature dynamic viscosity index of engine oil. With a sample volume of 5mL-6mL and a weight......
Shandong Shengtai instrument co.,ltd
|
ASTM D130 Copper Strip Corrosion Tester Machine Petroleum Product Testing Equipment
|
...Copper Strip Corrosion Tester/Oil Analysis Tester Description Of Oil Analysis Equipment Copper Strip Corrosion Tester The copper sheet corrosion tester is suitable for the determination of aviation gasoline, jet fuel, motor gasoline, natural gasoline or other hydrocarbons, solvent oil, diesel oil, distillate fuel oil, The extent to which oil, grease, and other petroleum products corrode copper......
SKYLINE INSTRUMENTS CO.,LTD
|
ASTM D2809 Simulated Service Cavitation Corrosion and Erosion-Corrosion Characteristics Tester For Engine Coolants
|
Product Description ASTM D2809 Cavitation Corrosion and Erosion-Corrosion Characteristics Tester The test method of the instrument is: use a standard aluminum automobile water pump to pump the sample, make it run for 100 hours under the conditions of 113°C, 103kPa, and the pump speed of 4600r/min, and then check the water pump to determine the degree of cavitation corrosion. degree and are graded according to the grading system table. Product...
Advanced Instruments Co.,Limited
|
ASTM D130 Copper Strip Test Bath For Corrosiveness To Copper From Petroleum Products
|
...Copper Strip Test Bath For Corrosiveness To Copper From Petroleum Products Introduction The copper strip bath is suitable to determine the corrosiveness to copper of aviation gasoline, aviation turbine fuels, automotive gasoline, tractor fuels, washing solvent, kerosene distillate, lubricating oil, other hydrocarbons with Reid vapure pressure not more than 124 KPa and other petroleum products......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
OEM Supported Easily Installed 3/4''X3/4'' Copper 90 Degree Elbow
|
3/4''X3/4'' 90 Degree Elbow Lead Free Introduction Product type 3/4''X3/4'' 90 Degree Elbow Lead Free Color Yellow brass color, or Nickel plated, or Chrome plated. Materials Made of high quality brass Produce According to drawings, samples and accurate ......
Taizhou JinQuan Copper Co., Ltd.
|
90 Degree 2A 360 mm Peeling Tape Adhesion Tester
|
...tin foil, lead foil, rubber cloth...The actual stripping strength of 90 degrees can be measured by stripping the specimen at a vertical Angle. Specification: Product name 90 Degrees Peeling Strength Tester for Adhesive Tape and Circuit Board Capacity 3, 5,...
Guangdong Aisry Instrument Technology Co., Ltd.
|
Antiwear 250V 10A Oil Flash Point Tester Corrosion Resistance
|
Constant Temperature Digital Petroleum Oil Density Tester Product Description GD-1884 Liquid Petroleum Density Meter/ Densitometer is designed and made as per the National Standard GB/T 1884-2000 "Test Methods for Density of Petroleum and Liquid Petroleum ......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
Automatic Open Cup Flash Point Tester ~400℃ Indoor Temperature RSKS-IV
|
...Tester Product Description RSKS-IV Automatic Open Cup Flash Point Tester used for GB/T267—2008, it is testing closed cup flash point for petroleum products. It widely used in the field of railway, air company, power, petroleum and research department. This instrument adopts large screen LCD, menu in Chinese/English. The instrument is a high degree......
Wuhan Rising Electric Co., Ltd.
|
Cu Oil Tool Joint Petroleum Drilling Tool Joint Beryllium Copper Alloy C17200
|
...Petroleum Drilling Tool Joint, Beryllium Copper Alloy C17200) Product Overview The Cu-OilTool-Joint is a high-performance joint for petroleum drilling tools, manufactured from Beryllium Copper Alloy C17200. This alloy is widely used in the oil and gas industry due to its high strength, corrosion resistance, hydrogen sulfide (H₂S) resistance, and excellent machinability. Material Properties Material Composition: Beryllium Copper...
JimaFor
|
90 Degrees Stripping Force Strength Testing Equipment for rubber
|
...Degrees Stripping Force Strength Testing Machine Product introduction: 90 degrees Film Stripping Force Tester is used to test the adhesion of copper foil circuit on PCB or test the surface adhesion of foil, aluminum foil, tape and other products. Using 90 degrees angle peel the materials to test actual peeling strength, it is the basic tester for quality management and physical property. ZL-3041 90 degrees stripping tester......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Submit your “petroleum products copper corrosion degree tester” inquiry in a minute :