ESM003 20KV Handheld ElectroStatic meter field 5 times/s Anti Static Eliminator Tester ±10% IP65 replace SIMCO

ESM-003 ESD Test Meter Electrostatic Field meter Hand-held electrostatic tester

ESM-003 Compact Design Hand Held Electrostatic Field Meter Automatic Power Off After 5 Minutes

The ESM003 is a convenient compact and pocketsized electrostatic fieldmeter.Can replace simco FMX003; With this fieldmeter you can measure and store the field strength and polarity. It enables you to carry out measurements in awkward places. The correct measuring distance is displayed by two integrated LEDs. The electrically conductive plastic housing with an earth connection fitted at the side ensures accurate measurements. The unique bicolour display shows the measured value both numerical and graphically. The status of the battery is shown on the display .

ESM-003 electrostatic field reflectoscoope reflector is a non-contact portable electrostatic field measuring instrument.is surveys the objectsurface static electricity value and the survey static electricity eliminatesequipment's ion trim

u Easy to read.easy to use operation

u Light weight .compact design

u Range light assures accurate and repeastable measurements

u Digital and bar graph display

u Automatic power off after five minutes(may be disabled if preferred)

Specification:

1.Measuring range: 0 to ±1.49KV ( Low range)
±1.0kV to ±20.00kV ( High range)
(range hysteresis: ±1.0kV to ±1.5kV)
0 to ±200V ( low balance measuring range)

2. Measuring distance: 1"±1/64" ( 25mm±0.5mm), LED guide for correct distance
( between object and fieldmeter)

3. Response time: <1s

4. LCD display renewal rate: 5 times/s

5. Accuracy: ±10%

6. Ambient conditions: 50°-100°F, (10°- 40°), 0-60%RH ( non-condensing)

7. Display featues: Bar graph, red LCD positive polarity voltage, blue LCD
negative polarity voltage

8. Bar graph precision: ±0.1kV for low range ±1.5kV for high range,
±15V for ion balance range

9. Digital reading: Auto-ranging , three digits x.xx=0 to ±1.49kV
xx.x=±1.0kV to ±20.0kV(Hi)
xxx=0 to 200 ( lon balance)
lon balance mode display: (IB) is displayed
Battery capacity display indicator
HOLD switch to retain display after measurement
Error sign (ERR)appears if the sensoe is damaged

10. Alarm feature: Beep sound will be heard during the folloeing actions;
Power on: one beep
Power on with auto Off feature disabled: {Depress power button
for more than 3 seconds} three beeps
Auto power-Off : short beeps at 1 seconds interval for 5 seconds
before power off
Over range: continous sond

11. Auto power-off: Power turns off automatically after five minutes,{ A OFF} is
display whenever this features is disabled

12. Power source: 9V, 6F22Y manganese battery

13. Battery life: In excess of 30 hours

14. Size: 123mm (L) x 72mm (W) x 25mm (D)

15. Weight: 170g

16. Case material: Conductive resin( ABS)

INNOVATION ELECTRONIC CO..,LTD Focus on Weighing and Static solution in Packing industry!

In the past tens of years, we established very good relationship with wide range of suppliers and customers in weighing and static products especially in packing industry and also investigated in our own factories of weighing and static, step by step, we get our own special advantages in this market: more accuracy and more economic weighing and static solution for you!

Our weighing solution mainly include:

1. all kinds of load cells( tension and compression load cell, s type load cell, single point load cell, shear beam load cell, those load cells are widely used in kinds of packing industry like food weighing and packing, cement weighing and packing, chemical dosing and packing, pharmaceutical dosing and packing, electronic balance, silo scale, truck scale, etc. )

2. High accuracy bench scale, floor scale, table scale, counting scale. They are widely used in kinds of places that need high accuracy weighing, like small bolts counting and packing, expensive powder and particles weighing and packing, sub-package system,etc.

3. Weighing equipment like dosing machine, checkweigher, roller conveyor scale, etc. This equipment are widely used in weighing and packing production line. The main use is to feed material of set quantity, and double check whether the weight is in the allowed range or not and eliminate the packages that not in allowed range.

The Static solution mainly include:

1. Static charging machine of 20KV, 30KV, 60KV, 100KV. They are wide used in packing material production line, like plastic film machine, bag making machine, IML labeling machine,side weld bag handles, shrink wrapping, electrostatic bonding, etc.

2. Static eliminators of 7.5KV, 6kv, AND anti-static bar,Ionizing air gun, Ionizing Air nozzle, Static foam, etc. These eliminators are widely used in static elimination before packing of finished products. It is to make the packing better, or to remove the dust on the surface of products.

If you have any weighing or static problem especially in packing industry, contact us, we are confident to provide you a suitable and economic Solution!