Line Control Automatic Gate Motors AC220V With Magenetic Limit Switch

1.The motor runs but the sliding gate operator doesn't work.

A:Check whether the clutch is closed.

2.The power indicator light doesn't flash and the key doesn't react.

A:Check whether power is connected right.

B:Check whether the fusel is burned,if yes,please exchange it.

3.The opening and closing limit can not work.

A:Check whether the limit adjustment switch is installed right.

B:Check whether the limit iron is installed right.Adjust the position of the limit iron.

4.Crash proof is not effective.

A:Check whether the connetion of crash proof is correct.

B:Check whether the photocell is installed right.

C:Check whether the connection of the wire of loop detector is right.

5.When the gate just close up,it turns to open.

A:Check whether the vlotage is normal.

B:If the crash proof equipment is installed,pease check whether it works well.

6.The remote control doesn't work.

A:Check whether the battery is work.If yes,change it.

B:Check whether the code of the remote control is the same with the code of the control

Contact:

Zoe Lee
Mobile: +86 135 3781 8437
Email : zoe@wonsunbarrier.com
Wechat: Zoelee0315
WhatsApp: +86 135 3781 8437
Shenzhen Wonsun Machinery & Electrical Technology Co., Ltd
Add: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community,
Biling Street, Pingshan District, Shenzhen, China. (Postal Code: 518118)