10KA 24V Signal Surge Protector BNC Interface Mode Low Insertion Loss Long Service Time

BNC home lightning protection protector, control signal, lightning protector, surge protector.

Product introduction

The control signal lightning protector is a lightning protection measure adopted by Zhejiang tol Electric Co., Ltd., which is independently developed and manufactured for signal circuit protection. The control signal lightning arrester is mainly used to protect the lightning (overvoltage) along the low voltage control signal circuit, so as to protect all kinds of voltage connected control signal equipment which are sensitive to electromagnetic interference.

Product features

1. the low attenuation and return loss in the wide frequency range ensure that the lightning arrester does not affect the system performance.

2. core components are strictly screened and their performance is superior.

3. low insertion loss to ensure unblocked lines

Use attention,

1. temperature: -40 to 70 DEG C; relative humidity: less than 95%; atmospheric pressure: 70kPa ~ 106 kPa.

2. Connect the protector to the front end of the protected device, so it must be connected reliably.

3. the lightning arrester is not required for long maintenance without longer maintenance. It only needs to be maintained by the system. In the course of use, the signal transmission is problem and the signal transmission is restored to normal after the surge protector is replaced, indicating that the surge protector has been damaged and needs to be repaired or replaced.

Product specification

Working principle of product

The control signal surge protector is connected to the front end of the protected equipment. When the transmission line is impacted by the inductive thunder and other transient overvoltage, the impact current is discharged to the earth through the protection branch of the surge protector, and the output voltage is placed in the allowable voltage range of the equipment, thus ensuring the safety of the operating equipment.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.