Deep Drawn Sheet Metal Components Round

HVAC ventilation Deep Drawing Parts stainless steel air vent Round shape
with bird mesh


Product Description


The material used to manufacture our stainless steel louvres is stainless steel 304, with a brushed
texture surface finish. Its construction specifications are the following: hood, weather resistant blades,
insect screen &fixed mounting connector with clips, all made out of stainless steel 304. Our stainless
steel louvres can also come equipped with the following accessories: rubber gasket + drip nose +
mounting screws.

Product detail drawing





Product Specification


Stainless steel louver can be installed in ducts or round openings in the external walls. It can serve
as an air supply or exhaust vents in the ventilation systems. Stainless steel louvers have wire mesh
on the inside to prevent the entry of insects or birds (depends on the size of mesh hole). Our SSL-A
model has an insect screen mesh and our SSL-B has a bird screen mesh. It has rubber gaskets and
it is fitted with mounting clamps to make its installation easier. It is featured by an attractive appearance
and a long durability.


Similar Products





FAQ


Q: What is the payment method?
A: We accept TT (Bank Transfer), L/C.
1. For total amount under US$3000, 100% in advance.
2. For total amount above US$3000, 30% in advance, the rest against the copy document.
Q: What is your MOQ?
A: MOQ depends on our client's needs, besides,we welcome trial order before mass-production.
Q: What is the production cycle?
A: It varies a lot depending on product dimension,technical requirements and quantity. We always try to
meet customers' requirement by adjusting our workshop schedule. Usually our normal lead time is 25-30
days for 1 full container; it is also up to the actual production situation and products structure.
Q: If you make poor quality goods,will you refund our fund?
A: We make products according to drawings or samples strictly until them reach your 100% satisfaction.
And actually we won't take a chance to do poor quality products.We are proud of keeping the spirit of
good quality.
Q: Could you offer competitive tooling cost?
A: We have own mold work-shop in our factory, for competitive tooling cost and on-time
samples.

Company Profile

Yuyao Jingqiao Hardware Factory (JH) was founded in 1997, JH is one of the largest manufacturers of metal stamping parts in Ningbo of China, which is close to the ocean ports of Ningbo and Shanghai. JH supplied the stamping parts with the local munufacturers since 1997, in 2004 JH began to export the goods through the China trading companies, in 2008, JH exported the goods directly to overseas markets, we continued to grow with steady steps, in 2012 General manager Jake Lu established another company AIER which was specialized in making standard ventilation parts for overseas construction market, now AIER has developed the largest exporter of the ventilation products in the whole Europe. Mr. Jake Lu is the only owner of both companies. JH/AIER are grown from a family workshop of 10 workers t where it is today.

Company name: Yuyao Jingqiao Hardware Factory (for custom stamping part business)Ningbo Aier Ventilation Equipment Co., Ltd (for HVAC accessories business)

Business type: Manufacturer

Location: Yuyao, Ningbo, China

Main business: HVAC accessories (60%) and Custom stamping parts (40%)

Main markets: Europe, North America and Middle East

Development History

1997 Established Yuyao Jingqiao Hardware Factory (500m2) for producing metal hardware products;

2004 Started HVAC accessories business, expanded factory size to 2500m2;

2008 Further expanded production range and factory size to 8000m2;

2008 Launched the whole range of Iris Damper (from dia.80mm to 800mm), to be the first (only) Chinese manufacturer of Iris Damper;

2014 Established Ningbo Aier Ventilation Equipment Co., Ltd (under the same group and management of JH);

2014 Built a new factory equipped with automatic production lines (size: 12,000m2);

2018 Built another 10,000m2 factory, total production facility size up to 22,000m2.

Company Capacities

Size : 25,000 sqm 
Employees: 250 
Punching capacity: from 16 to 500 tons 
CNC Laser cutting: 3 Kilowatte
Process: Blanking, Piercing, Bending, Forming and Deep drawn. 
Second operation: Riveting, Tapping, Electroplating, Welding, Drilling, powder coating, Assembly
Materials: hot & cold rolled, galvanized, stainless steel and aluminum steel are the popular steel, anyway, we will follow customers' request.