Product Details
Company Profile

Digit TN LCD Display , Ultra Low Power LCD Display Module ISO9001

ltra Low Power Lcd Display Module Digit 7 Segment Tn LCD Display

Rear polarizer type:
There are three types of polarizer: transmission polarizer; transflective polarizer and reflective polarizer.
A. If No LED backlight, please choose reflective polarizer.
B. If LED backlight is necessary,then you can choose transmission or transflective polarizer.
C. Transflective polarizer is better and expensive than transmission polarizer. But transflective LCD will have a uniform light result compared with transmission polarizer. What is more, when LED backlight is off, transflecitve LCD will also have a good display result.
D. For transmission polarizer, when it is negative LCD or LED backlight alway be on, then it is better use transmission polarizer.

Basic Information:

ITEM	CONTENT	DESCRIPTION
1	Display Outline Size	56 ( H ) * 32 ( W ) * 1.1 mm ( T )
2	Viewing Size	50 ( H ) * 25 (W) mm
3	Voltage	3.5V
4	Operation Temperature	-20～70℃
5	Drive Parameter	1/4 Duty 1/3 Bias
6	Backlight	3pcs Led or 2pcs Plug-in Led
7	Color	White
8	Interface	Pin

Connection mode of LCD.
How to connect LCD on your PCB?There are four type of connectors for your choice.

1. Metal pin connector. It is very common connection way. Pins should insert into PCB holes and solder it. It is very strong and firm. LCD,LED backlight or PCB can be connected together as a LCD module.

2. Zebra strip.When it is zebra strip connector ,then zebra strip should be between LCD and PCB.You should compact LCD and PCB evenly,so that zebra trip can contact and breakover PCB with LCD.

For the connection,If you must make sure that LCD and PCB can be compacted well, or else LCD can't be displayed or just display a part. But zebra strip is cheap.

3.Heat seal paper.Heat seal paper is a flexible connect way. Heat seal paper can be heated pressing on LCD and PCB directly. But head seal is easy to be oxidized after a few years.

4.FPC(Flexible Printed Circuit) connection. FPC connector is also a flexible connect way. FPC quality is very good compared with heat seal paper. It is a good connection way,but price and tooling charge is higher.

Inspection Standard

Surface Inspection	18 (subordination )	Requirement Postive Lcd Display: Punctiform defective (Lcd with dirty spots, paster with dirty spots, glass surface damage, polarizer damage (after the paster is visual) Φ=(L+W)/2 L=Length W=Width	Inspection Standard	≤10 mold	11~30 mold	31~80 mold	>80 mold
			φ≤0.1mm	Ignored	Ignored	Ignored	Ignored
			0.1mm<φ≤0.2mm	3	3	2	2
			0.2mm<φ≤0.25mm	1	1	0	0
			0.25mm<φ≤0.3mm	0	0	0	0
			0.3mm<φ≤0.35mm	0	0	0	0
			0.10mm<φ≤0.35mm accept total quantity	3	3	2	2
			Note: 1. 0.15mm<φ≤0.25mm the distance between two points should be >5mm, the above defects status can be ignored when it is outside of V/A area. There are special status subject to customer request or sample signed
		Requirement Negative Lcd Display: Punctiform defective (Lcd with dirty spots, paster with dirty spots, glass surface damage, polarizer damage (after the paster is visual) Φ=(L+W)/2 L=Length W=Width	Inspection Standard	≤10 mold	11~30 mold	31~80 mold	>80 mold
			φ≤0.1mm	6	5	4	3
			0.1mm<φ≤0.2mm	3	3	2	1
			0.2mm<φ≤0.25mm	0	0	0	0
			0.25mm<φ≤0.3mm	0	0	0	0
			0.10mm<φ≤0.35mm accept total quantity	6	5	4	3
			Note: 1. 0.1mm<φ≤0.25mm the distance between two points should be >5mm, the above defects status can be ignored when it is outside of V/A area. 2. There are special status subject to customer request or sample signed

Product Tags:


*From:	Your email address is incorrect!
*To:	HongKong Guanke Industrial Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	TN LCD Display
Brand Name:	Fangsheng
Model Number:	FTP1013TP01
Certification:	ISO9001:2015
Place of Origin:	Dongguan,China
MOQ:	500
Price:	Negotiation
Payment Terms:	T/T,Western Union, Paypal
Supply Ability:	200K Sets / Month
Delivery Time:	3 ~ 5 Working Days
Packaging Details:	Bubble bag + Blister + Foam box + Carton
Lcd Type:	TN Lcd Display
Voltage:	3.5 V
LED:	White
Display Mode:	Transmissive, Transflective