Screwdriver with screw holder and screw automatic feeding system

Intro:

RKENS provide professional Screwdriver with screw holder and screw automatic feeding system. The screw locking and feeding machine include 3 parts: 1.Screw feeding system. 2. Screw sorting system. 3. Screw locking system.

With screw feeding system and holder, it can feed and fasten screws fast. This screwdriver with feeding system can save much labor and ensure high efficiency.

Suitable:

Screwdriver with screw holder and screw automatic feeding system, the screws will be meet below requirements.

1. b>=1.3* D
2. Screws should be M2 to M6. 2mm<=d<=6mm
3. 3.5mm<=D<=11mm (D can be Max20mm. It should be better within 3.5-11mm.

Specification:

Screwdriver with screw holder and screw automatic feeding system

Features:

Screwdriver with screw holder and screw automatic feeding system

1. Automatic screw feeding, sorting and locking for various shapes screws. One-hand operation.

2. Torsion precision and convenient adjustment, ensure the quality of screw locking

3. Turbine feeding, low volume and noise, convenient maintenance. Light weight and small, mobility and save space.

4. Warning function when lack of screws.(Acousto-optic alarm)

5. High efficiency. No need to pick up screws, move screws and put screws. Just need to lock the screws aimed at the screw hole.

6. Sensor controls screws feeding one by one to avoid feeding repetition.

7. Can lock screws very fast, around lock 60 screw per minute.

Working conditions:

1, Screw specification requirements:
The screw length should be over 1.3 times greater than the screw cap’s diameter.

If the screw cap is greater than the screw length, the screw cap may come out first, because the screw will turn over during feeding screws.

The screw length should be less than 45mm.

Welcome to contact our Screwdriver with screw holder and screw automatic feeding system

RKENS TECHNOLOGY CO., LTD was founded in 2007. RKENS is the fast growing manufacturer of various equipment, such as SMD counter, Automatic Tube/Tape/Wire Cutting machine, Axial lead forming machine, Radial lead cutting forming machine, wire cutting stripping machine, wire crimping machine, Label machines, PCB depaneling Machines,etc. Our continuing expansion of manufacturing facilities worldwide provides immediate availability of our products and technical support to meet the needs of our customers. Today, RKENS is an international supplier of high quality equipment. We pledge to continue to provide customers with the good quality and service in the 21st century.

It has the professional research team, sales and production team. Also it is equipped with advanced production and testing equipment system. With the philosophy that qulity is the soul of an enterprise, we pay much attention to product quality, and strictly manage every process, like raw material purchasing , parts prodution, installation, QC, sales and after-sales service, etc. Because of all our effort and good quality, our products have got good comments from customers around the wolrd, such as customers from USA, Europe and Asia, etc.

In the following years,we will devote ourselves to better product and better service to serve our old and new customers. Also we will be open to all our customers and appreciate all feedbacks and advice.

Technical Support & Services

RKENS product management group provides technical assistance on the products being used.
You can contact us by phone, fax, E-mail or this website. We guarantee you our prompt attention.