ODM Deep Drawn Parts

Metal sensor deep drawn stamping housing

1. Elastic deformation stage. In this case, the strain is equal to σ/E, and the relationship between strain and stress is linear. At this stage, the strain ε continues to occur, but the stress σ does not increase linearly with the strain, but fluctuates up and down in an interval, the lower limit of which is usually defined as yield strength 3. Hardening stage. At this stage, the material is hardened by cold working, and the small strain can cause the stress to rise sharply, and the stress reaches the maximum at a certain point, which is called tensile strength 4. Necking stage. At this stage, deformation can continue to occur without too much stress, and the material will shrink at the same time. When the necking occurs to a certain extent, the material will fracture

Drawing techniques are extremely complex, and the following important factors should be considered in practice

1)selection of materials

2)Selection of lubricating oil

About us

Jiaxing Dexun Co., Ltd. was established in 1997, origin from Taiwan, we are professional manufacturer and exporter integrated with design, research & development, manufacturing and sales of OEM/ODM stamping parts,deep drawing parts, standard welding fasteners and non-standard welding fasteners.

* Located in jiaxing city, only about 1 hour's drive from Shanghai, Hangzhou, Ningbo, Suzhou, these important cities, the transportation is very convenient.

* 2 mature mould development workshops with advanced equipment to develop mould for customers.

* 2 International approvals,Verify & certificate in accordance with ISO9001,IATF16949, work with SGS, operate the PPAP Level 3.

* 2 labs of quality inspection,Control products quality strictly; equipped with various quality testing machines including direct-reading spectrometers, tensile testing machines, CMM machine, X-ray flaw detection instrument.

* 2 quenching and tempering heat treatment lines.

* 2 automatic welding lines.

* 4 Powder coating & Painting lines, Plating lines

* 42 people professional R&D team : 30 special technicians and 12 senior engineers.

* 20 years’experience on manufacturering OEM/ODM products

* 100 sets of automatic production machines: Have 10 sets of automatic stamping & deep drawing equipments, 50 cold forming machines; 40 tooth grinding machines ,equipped with Japan, Germany,etc imported machines.

* 175 employees

* 10 millions monthly production capacity

* 35 countries exported to

* Supplying products to GM,John deere,Wal-Mart，etc

* Implement environment protection concept; strictly operate the facilities and processes under environmental requirements.

We use advanced equipment to improve cost and quality at the same time to make sure lowest price and best quality for customers. We have quality control experts & engineers to test every piece product before shipment. We keep on studying to provide professional service.

Our Mission & Vision

We always work hard to be an environment protection model enterprise. We strive for sustainable development. We hope to be a win-win partner of our customers all over the world.

Environment protection mission:

A full series of environment policies are applied to our every manufacturing activities. Firstly, to propagandize environment protection policy to make sure environment-friendly concept is everywhere in our company.
Every new staff will have environment protection training class. All staffs have environment protection knowledge and policy lecture every month. All the operation manual will marked out environment protection requirements.
Secondly, to establish environment protection responsibility policy.
Thirdly, to have basic environment protection management.
Step 1: Have environment monitor every time.
Step 2: Manage the pollutant treatment equipment efficiently.
Step 3: Establish permit system of pollutant discharge.
Step 4: Establish legal audit system.
Fourthly, to build up emergency rescue system.