mill tooth tricone bit

Brand Name:chuanzuan

Model Number:IADC 127

Place of Origin:china

8 1/2 Inch Steel Tooth Tricone Bit / IADC 127 Mill Tooth Tricone Bit Commodity Size IADC Thread Connection WOB (Weight On Bit) RPM Formation 8 1/2INCH 127 4 1/2API REG 19684~53428lbs 87.5~237.5KN 180~80 Low compressive ...

Brand Name:JSBIT

Model Number:374.6mm IADC 127 mill tooth tricone drill bit

Place of Origin:cangzhou, Hebei, China

...mill tooth tricone drill bit for soft rock drilling JSBIT tricone bits factory offers all kinds of tricone drill bits. Tricone bits are available in new and used tricone bits , steel tooth and tungsten carbide insert, in sizes from 37/8" to 36", for use in all formations, with any bearing: seal type / air type , tricone bits...

Brand Name:ROSCHEN

Model Number:3 7/8"~26"

Place of Origin:China

... Rock Drill Bits: Cone Size 17 1/2" Bearing Type Elastomer Sealed Bearing Tooth Type Steel /Milled Circulation Type Mud Fluid Thread Connection 7 5/8 Reg Pin Gauge Protection Unavailable Shirttail Protection Unavailable The milled tooth (steel tooth)

Brand Name:ENG

Model Number:1375

Place of Origin:China

... structures and innovative features tailored to address the diverse challenges encountered in different downhole formations. When it comes to soft rock formations, Mill Tooth tricone bits with steel teeth stand out as

Brand Name:FLRT

Model Number:13 3/4" FSA124G

Place of Origin:China

...Milled Tooth Tricone Bit , Sealed Roller Bearing , Roller Cone Drilling Bit , Rotary Drilling Bit RECOMMENDED DRILLING PARAMETERS FOR APPLICATION Types & IADC Code 116 117 126 127 136 137 216 217 246 247 326 327 WOB KN/mm(Bit Dia.) 0.48~1.0 0.48~1.0 0.48~1.0 0.4~1.0 0.4~1.0 0.55~0.85 Lb/in. (Bit...

Place of Origin:HeBei . China

...Bits /tricone bit /tricone drill tci bit Introduction Air or drilling fluid allows the broken rock debris to survive in an upward annulus from the bottom of the hole. As the rotation continues, another tooth contacts the bottom of the hole and generates new rock debris, thus the process is continuous. High quality tungsten carbide blade (TCI) drill bits and milling tooth (MT) drill bits...

Brand Name:KSQ

Model Number:Milled Tooth Tricone Bit

Place of Origin:China

... 4. The roller cones have high end sealed bearings; extremely high quality tungsten carbide and diamond gauge protection throughout the drill bit as well as

Brand Name:Steel Teeth sealed journal bearing bits

Model Number:mill tooth tricone bit

Place of Origin:Hebei,China

... for drilling through hard formations, as it provides excellent penetration rates and long bit life. The number of teeth on these bits varies depending on the size and IADC (International Association of Drilling Contractors) code of the bit. Speaking of

Brand Name:GLORYTEK

Model Number:6" 152mm

Place of Origin:China

...Tricone Rock Bit/ Rock Drilling Bit/ Roller Cone Bit Description ---We are a 100% factory(manufacturer) of tricone bits (both Steel Milled Tooth and Tungsten Carbide Inserts Bit) from 3" to 20" PDC drill bits from 3 1/2 to 17 1/2 inch, with 20 years' experience. ---We have passed factory audit by SGS. All of drill bits...

Brand Name:New Diamond

Model Number:12 1/4” 311mm Tricone drill Bits

Place of Origin:Hunan, China (Mainland)

... and the bottom of the contact area is small, high pressure, easy to eat into the ground, work The total blade length, and thus reduce wear and tear. Tricone bit to adapt to a variety of stratum from soft to hard. According to the

Brand Name:Tianying

Model Number:9 7/8 inch IADC635

Place of Origin:CHINA

...Tricone drill bit for hard formation mining tools Application IADC635 series apply for the soft formation TCI tricone bits are used to drill low compressive strength, very soft formations. This bit maximized to use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit...

Place of Origin:Hebei,China

...&Gas Drilling,Mining,Water Well,Geological Exploration areas.Our tricone bit divideds into metal sealed drill bit and rubber sealed bit. 1. The C-Center jet can avoid the formation of a ball in the bit, eliminate the fluid area at the bottom of the well,

Place of Origin:Hebei,China

Three cone drill bits have good stability. During the drilling process, the three cone drill bit can maintain small vibration and deflection, which allows the drill bit to move more accurately along the predetermined wellbore trajectory, improving the ...

Brand Name:OHANG TECH

Place of Origin:CHINA

...Product Features SRM (Slide Bearing-Rubber Sealing Milled Teeth) bits can load a higher WOB in normal RPM condition. It applies in different formation from very soft to very hard matched with different cutting structure. ...

Brand Name:JCDRILLS

Model Number:14inch

Place of Origin:Hebei,China

...Milled tooth tricone rock bit and steel tricone drill bit tunsten carbide for water well Application 14inch API Sealed Steel Tooth Tricone Drill Bit for Rotary Mining Drilling IADC 214 / 215 / 216 / 217 is suitable for various formations, and achieves high RPM under low to medium WOB application Characteristics Cutting Structure The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth

Brand Name:SOLLROC

Model Number:4"-20" with API thread

Place of Origin:China

...Tooth Tricone Bit Tricone Drill Bit For Drilling Product specifications: Tricone bits are available in new and used (re-tip and re-run) steel tooth and tungsten carbide insert, size from 3 3/8”(85.7mm) to 26”(660.4mm) for use in all formations, with any bearing/seal type, and a wide range of additional custom features. Tricone bit, are widely used in mining, oil well, water well, thermal drilling. Tricone bit...

Place of Origin:HeBei

Brand Name:TengDa

Model Number:86-15831757006

... Steel tooth bit: Soft formation tooth bits: The soft formations tooth bits are used to drill low compressive strength, soft formations. Long projection tooth lengths are used on high offset cones to provide the greatest penetrations rates possible.

Brand Name:MIROC by KSQ

Model Number:Tricone Bit

Place of Origin:China (Mainland)

...26", with open or sealed bearings, regular or jet circulation, and a wide range of additional custom features for ideal performance in any formation. Tricone bits can be customized to optimize penetration rates and bit life in particular formations and

Brand Name:JTHL

Model Number:roller bit

Place of Origin:China

... code. 2. Fast drilling speed. 3. Reliable bearing system and long working 13 5/8" Steel tooth tricone bit Inserted Tooth and Milled Tooth Tri-cone Rock Bits, Our products have reliable quality and competitive price Tricone Bit/ TCI Bit Inserted Tooth and