fiber cable ends

Brand Name:monoluxtecs

Model Number:TS00527

Place of Origin:CHINA

...Fiber Cleaver 2.2/4.4 Mm POF Plastic Optical Fiber Cable End Cutter Product Description: & This product can comprehensively complete the cutting, splitting and stripping of plastic optical fiber in the palm of the hand. All the problems of on-site construction, connection and installation of plastic optical fibers are also applicable to the cutting and stripping of lighting 88 plastic optical fibers...

Brand Name:Unifiber or OEM

Model Number:Optitap Patch Cord

Place of Origin:China

...sealed connection solution for fiber to the home (FTTH) connectivity, this cable one end pre terminated with optitap connector, another end with standard SC/APC connector, end user can order the cable with any customized length like 100m 150m 200m or 300m.

Brand Name:Unique-Tel

Model Number:Splicer

Place of Origin:China

...Fiber Cable Core Alignment Fusion Splicer For SM MM PM Fibers Introduction Core Alignment Fusion Splicer is the act of joining two optical fibers end-to-end.The goal is to fuse the two fibers together in such a way that light passing through the fibers is not scattered or reflected back by the splice, and so that the splice and the region surrounding it are almost as strong as the intact fiber...

Brand Name:SOGOO

Place of Origin:Guangdong, China

...DLC SM / MM CPRI patch cord with both end socket protection CPRI DLC to DLC outdoor fiber patch cable, it including 3 &34 cm armoured branch patch cord. It is outdoor Protected Branch Cable. DLC/DLC, GYFJH fiber cable, 2Core, MM,7.0mm dia, SM or MM. ...

Brand Name:YINGFENG

Model Number:SC to LC Fiber Patch cord

Place of Origin:CHINA

...Fiber Cable is a section of fiber with a fiber connector on each end, one end has a SC fiber connector and the other end is a LC fiber connector to connect the optical path. Yingfeng's patch cables can be assembled with various types of connectors (such as FC, SC, ST, LC, MU, MTRJ, etc.) with three types of polished fiber ends...

Brand Name:HICORPWELL

Model Number:E2000 APC Fiber Optic Pigtail

Place of Origin:China

...Fiber Optic Cable E2000 APC UPC Pigtail Optical Fiber Cable Connectorized cable assemblies are cord-type fiber optical cables terminated with connectors at both end. The type of cable fiber and connector and the length of the patch cords can be freely specified by the customer as shown below. Pigtails are used for terminating fiber optical cables by splicing them the fibers of the cable and connecting the other end...

Brand Name:HC , OEM

Model Number:ANJ

Place of Origin:CHINA

...gripping the conductor, grounding wire and optical fiber application. According to the application needs, the guy grip includes dead end cable grips and dead end grip. The guy grip has helically formed legs with inert grits on every turn that holds the

Brand Name:OEM

Model Number:FC/APC Fiber Optic Pigtail

Place of Origin:China

...Fiber Optic Cable , FC / APC 12 Core Optical Fiber Cable Fiber Optic Pigtail is important of optical network.they have same or different connectors which are installed on the end of fiber optic cable. The Fiber Optic Pigtail series comes with a comprehensive collection of lengths and connectors to fulfill your demand for the deployment. 1. Features: High return loss Low insertion loss and back reflection loss Ferrule end...

Brand Name:XDK

Model Number:Customized MTP® 24 Fibers OS2 Single Mode Conversion Harness Cable

Place of Origin:China

... cable, MTP® conversion cables are terminated with MTP® connectors on both ends, can provide more possibilities for the existing 24-fiber cabling system. The 40G/100G MTP® conversion cables eliminate the wasted fibers in current 40G transmissions and

Brand Name:OEM

Model Number:SC/APC-LC/APC-12F-5.0-L-10M

Place of Origin:CHINA

... Single-mode is a multi-strand fiber patch cable built on indoor 4,6,8,12,24 core distribution fiber trunk cable, with LC/SC connectors terminated directly on both ends of 1.8mm fanout legs. Fiber trunk cables are a convenient and economical alternative to

Brand Name:ANSHI

Model Number:AS-FTTH-ACC-16

Place of Origin:China

...End Clamp For Fiber Cable Fiber Optic Accessories Cable bushings were originally designed for indoor use on sheet rock.Cable bushings are plastic grommets inserted into a wall to provide a clean appearance for coax cable,fiber optic cable and all cable entry. Cable bushings are a low cost and fast alternative to installing traditional wall plates.They protect the cable...

Model Number:E2000 / UPC Multimode OM2 Fiber Optical Pigtials

Place of Origin:China

...Fiber Optic Cable E2000 / UPC Multimode OM2 50 / 125 , Easy Strip 900UM Pigtail Description: The optical Fiber Connectors is a length of optical cable with connectors fixed on two ends to realize the optical path active connection. Pigtail is a length fiber cable with only one connector fixed on one end. If both sides of the connector or its end...

Brand Name:New Light

Model Number:MPO MTP

Place of Origin:Shenzhen, China

...cable 8 core fan-out fibre jumping cable for data communication The optical Fiber Patch Cords is a length of optical cable with connectors fixed on two ends to realize the optical path active connection. Pigtail is a length fiber cable with only one connector fixed on one end. If both sides of the connector or its end...

Brand Name:CLX

Model Number:CLX

Place of Origin:Guangdong,China

...Fiber Cable Connector Machine End Face Grinding Four Corners Pressurized Fiber end face Grinding Machine Optical Fiber Grinding Machine Model:CLX-02E Place of Origin:ShenZhen,China Fiber Optic Grinding Equipment Product description This Square Pressure Fiber...

Place of Origin:China

Brand Name:TTI Fiber

Model Number:FPC-MPO

...Type: Ribbon fiber optic cable, Flat and Round Cable Jacket: LSZH, OFNR, OFNP, PVC Cable core: 4core, 6core, 8core, 12core, 24core Desciption: MTP/MPO fiber optic patch cord is used in Ribbon type multi fiber assemblies, unlike simplex or duplex. There are

Brand Name:OEM/ ODM/ Lansan

Model Number:LC Fiber Patch Cord

Place of Origin:China

...Fiber Patch Cord Cable Description The optical Fiber Connectors (Commonly we call Patch Cords) is a length of optical cable with connectors fixed on two ends to realize the optical path active connection. Pigtail is a length fiber cable with only one connector fixed on one end. If both sides of the connector or its end...

Brand Name:YINGDA

Model Number:MPOf-12LC-OM2-03

Place of Origin:china

...Fibers Breakout MPO / MTP -LC Harness Patch Cord Cable 0.9mm SM MPO SM fiber cable description YINGDA MPO / MTP Fan-out patch cords are simplex multifiber Cable using the MPO / MTP connector in fiber counts of 4, 8, 12, 24 or 48. There is Male or Female MPO / MTP connectors on each end, the other end...

Brand Name:FURONG

Model Number:FTTH Fiber Opitc Cable

Place of Origin:Guangdong ,China

... rounting. Diveces of different types are connected with patch cords. It is a length of fiber cable with connectors fixed on two ends to realize the optical path active connection. If both sides of the connector or its end-face are different, we call it

Brand Name:CY COM

Model Number:LC Uniboot

Place of Origin:Shenzhen

...Fiber Cable OM3 OM4 LC/UPC-LC/UPC Duplex 2.0mm Suncall LC connector Fiber Optic Patch Cable is also known as fiber optic jumper or fiber optic patch cord. It is composed of a fiber optic cable terminated with different connectors on the ends. Fiber optic patch cables...

Brand Name:EBOCOM

Model Number:GJFJH

Place of Origin:Shandong，China

...fiber optic cable are optical cables laid in buildings. It has low tensile strength and light weight, which is economical for establishing communication network in buildings. It’s mainly used for communication indoors, computers, switches and end user equipment in buildings. The distance of indoor fiber optic cable is generally not long, and multimode fiber cable can be used. Optical fibers...