Aluminum extrusion curtain wall profile in different surface
|Product||Aluminum extrusion curtain wall profile in different surface
|Material||Alloy 6060, 6061, 6063, etc.|
|Color||Different colors available (black, blue, green, champagne, bronze,
golden, vermillion, etc.)|
|Surface treatment||Mill finish, anodized, electrophoretic coating, powder coating,
thermal break, wood grain/wood-in-shift, etc.|
|Mould||Based on your drawing or use our mould free|
|Sample time||Usual practice: within 15 working days against payment|
|Usages||Windows, doors, curtain wall, solar panel, LED panel, heat sink,
|Certified||ISO9001-2008 Quality System,|
disheated aluminum alloy doors and Windows installation process:
1: When installing the combination door and window, the
corresponding position of the window opening and the spriting
materials is set up or reserved. Has grown two millimeters has
grown two millimeters spell is connected with the mouth of the
cave: spell materials and concrete lintel or connected to the
columns should be set embedded iron, adopts the method of welding
is fixed, or press fasteners on the embedded parts base hole, then
with fasteners; When connecting to a brick wall, it is necessary to
insert the two ends into the reserved hole, then use the C20 fine
stone concrete. The door window frames should be connected to the
spline, then the fasteners should be tightened in two directions,
and the spacing should be less than or equal to 400mm. Sealing of
the sealing strip between the fasteners and the frames and the
2: When the doors and Windows are connected with the wall, the wood
bricks should be embalmed.
3: The inner cavity of the expansion joint between the window frame
and the opening hole should be filled with the elastic material
such as the closed-hole foamed plastic and foamed polystyrene, and
the surface is sealed with sealant. Suitable insulation and sound
insulation material should be used for the project of high
insulation and sound insulation.
4: doors and Windows are clean, unscratched, bruised and uncorroded.
The coated surface is smooth, flat, uniform and no porosity. It is
strictly forbidden to install scaffolds or heavy weights on doors,
Windows, and trays, and prohibit the stamping of window frames,
Windows or Windows. The surface of doors and Windows is stained
with oil, should be washed with water soluble washing agent, avoid
to use coarse or corrosive material to clean.
Corporate Introduction :
Guangdong Yong long Aluminum Co., Ltd. is located in the No. 10
(Sanjiang market) of Leping Town, Sanshui District, Foshan. The
company was founded in 1997. It is a comprehensive and large-scale
aluminum profile enterprise integrating the research and
development, production and sales of aluminum alloy profiles. The
company is leading the "Hongying" brand. Strong comprehensive
strength and excellent service make Yong long "Hongying" sell well
all over the country and exported to Southeast Asia, Europe, South
America and many other countries.
The company has 900 employees, including 120 high and intermediate
engineering technology and management personnel, with advanced and
perfect design, production, testing and testing methods as well as
perfect sales network and after-sales service system. The products
sell well in more than 10 national and foreign ports, Australia and
Please tell us the information below, and we will give the best
suggestion to you !
1. Where you intend to use the aluminium profiles?
2. If you have the estrusion drawing, send us and we develop the
3. Which color you want or tell us the architectural style you
4. Purchase quantity. It will convenient us to give you the best
Welcome to visit our company !
Choose us & contact us !