500m Water Level Meter Steel Ruler Well Level Depth Meter Water
Level Indicator Price
Application
This Steel Ruler Water Level Meter is the high accuracy instrument
to measure water level. It is common used to measure the water
level in wells, boreholes and standpipes. The depth is to 900
meter.
System compose
The system composed of sonde, ruler cable, the receiving system and
reel, etc
1. Sonde: Stainless steel, inside mounted the water resistance
point, when the point touch the surface, the receiving system will
be turned on, when the contacts out of the water, the system will
automatically turn off.
2.Ruler cable parts: Together with the ruler and wires, with good
function of corrosion resistance, Oil resistance, microbes
resistance.
3. Receiving system: composed of the sounder and peak indication.
When the sonde reach to water, the water completes an electrical
circuit powered by a 9v battery, sending a signal back to the reel
where a light and clearly audible buzzer are activated. The water
level is then determined by taking a reading off the cable at the
top of the borehole, casing or tube, and then measuring off to the
nearest mark.
4. Reel: composed of wire spool and holder, the receiving system
and battery are mounted inside the wire pool. Outside the wire
pool, the ruler cable is on it.
Technical SpecificationNO | 30 | 50 | 100 | 150 | 200 | 300 |
Depth(m) | 0-30 | 0-50 | 0-100 | 0-150 | 0-200 | 0-300 |
Resolution(㎜) | 1.0 |
Error(㎜) | 2.0 |
Weight(㎏) | 3.5 | 4.5 | 6.5 | 10 | 15 | 20 |
Power(V) | 9 |