ET 6X1600 Slitting Machine For Light Pole Machine To Get One Side
Bigger One Side Smaller Plate
|Name||Other name||Brand Name||CMC|
|Steel plate slitting machine for light pole|
Ladder shaped plate cutting machine,
Light pole cutting machine,
|Feature||Our line can cut the scrap edge of the steel sheet, cut one piece
into 3 piece, and get one small size and one big size width|
2-6mm in thickness
12000mm in length
800-1600mm in width
|Usage Industrial||Street light pole industrial|
The light pole plate slitting machine is base on the rolling
There are two precess step on the machine:
First step is to cut the scrap edge of the hot rolled steel to get
the exact width and good edge which is good for light pole seam
There is a dolly in the front of the slitting unit. It is for
control the straight cutting.
Second step is to cutting the light pole taper steel and get one
side big one side small width steel plate.
There is a dolly in the cof the slitting unit. It is for control
the taper cutting degree. Through changing the base position on
dolly to change the taper degree.
It is for light pole material to cut the scrap edge of the sheet
two sides, and slitting the sheet into 3 pieces or 2 pieces to get
one side small and one side big width.
|Max. Cutting Thickness||Mm||2.5~6|
|Max. inner Width of double slitting unit||Mm||1600|
|Max. inner Width of taper slitting unit||Mm||1800|
|Max. Cutting Length||Mm|
12000 or 14000
|Power of the motor||Kw||5.5+5.5|
40x3m( for 12m light pole),
or 46x3m( for 14m light pole)
What is the difference with our cut to length and steel plate
The cut to length is suitable for the material: steel coil, while
the steel plate slitting machine is for the metal sheet. Therefore,
if the customers have many orders, then we suggest customer to buy
steel coil, if less quantity and small budget, then clients can buy
metal sheet from market directly.
Communication with customers
A: How to guarantee the cutting rate?
B: In fact, the work can measure the size and make mark on the
sheet, then the position of the stopper on dolly to control the
taper slitting rage.
A: How about speed of this machine?
B: It can reach 12m / min. It means we can get two poles material
in one min.
A: How long is your quality guarantee period
One year. And when the machine arrives at customer workshop, we
will send engineer to commissioning machine and give training. But
also, the client can let their engineer to our workshop to study