Industrial High Speed Mixing Kettle Water Milk Powder Mixer
The powder mixer is widely used in the waste water treatment, it can mix the
compounds continuously and effectively, so the reactive polymer
solution appears. These main components of the machine: Polymer
feed machine (including material hopper), Dry powder infiltration
device, Tank, Level controller, Mixer, Dosage water inlet pipe,
Electric control panel.
1- Polymer dosing device
Polymer dosing device is composed of hopper, push screw, electric
heater and etc. The effective volume of the hopper can meet the
dosage for a long time which is equipped with sight glasses for
observing material level monitored by the dry powder level meter.
The push screw driven by the high-precision reducer can satisfy the
dosage. The electric heater can be installed in the discharge pipe
of push screw, and it can prevent the powder from caking.
2- Polymer dissolving device
Polymer dissolving device is composed of pre-soaking device, tank,
and 3 sets of mixers. The pre-soaking device is to infiltrate and
mix the polymer powder in advance. The 3 tanks are precast mixing
tank, homogeneous slaking tank and solution storage tank, in which
there is a mixer correspond to guarantee the homogeneity.
3- Water supply device
Water supply device is composed of pipeline, manual ball valve,
filter, pressure gauge, solenoid valve, stop valve, and the rotor
flow meter, etc.
1- Fully automatic operation including automatic dosing, dissolving
2- The highly precise dry polymer dosing device and the well-designed
heater device can prevent the polymer from caking.
3- The dosage of dry powder and water can be adjustable, so the
solution with any
concentration can be prepared.
4- Optional: Vacuum feeding machine.
5- Optional: on-line dilution system.
6- Tank material: SS304 or SS316l, Polypropylene PP, FRP etc.