RO water, mineral Water 5L, 6L jar and bottle filler machine /
filling and capping machine
The water line is composed of separate rinsing, filling and capping
units. It is innovated and designed in the requirement of still
pure water and mineral water in big jars, on the bases of
introducing, digesting and absorbing advanced technology from
Germany and Italy.
Still water, pure water, RO water, mineral water, sparkling water,
etc. in 3L, 4L, 5L, 6L, 8L, 10L bottles and jars
Spring cramps are used in the bottle washing process. The empty
bottles can be turned over 180° along the conveying rail. There are
two times of internal and external washing, the efficiency of
bottle washing is high.
Rinsing machine adopts our company original overturn and
double-opened bottle clip. Bottle clip lock the bottleneck, the
material of bottle clip is SUS304, which is hygienic and durable.
Bottle clip equipped with efficient spray on nozzle. The extrusive
droplet with the angle 15° ensures to wash all side of the bottle,
and can save the water.
The design of filling structure is reasonable and hygiene dead
angle, the run of equipment is stable, it can control the material
from the bottleneck, the control accuracy is within ±2mm.
The filling valve material is SUS304
The filling system has liquid level automatic control.
Filling valve lift is controlled by the valve elevator, after
filling valve contact the bottleneck, it starts to fill.
Bottle is conveying by the wheel in the filling part.
Screw Capping Machine
Screw capping machine is most precision part in the machine, which
has a big influence to the goods stability and defective rate. Our
screw capping has following feature.
1) Our company import of advanced technology of screw capping,
improve the stability and reliability of the screw capping machine.
The magnetic torque is used for screw capping. The power of screw
capping can be adjusted without steps. The power of the screw
capping can also be fixed, and the caps will not be damaged, the
capping is reliable.
2) In the screw capping part, installed photoelectricity control,
when it has no cap or the cap is bad, the machine will stop
- Touch screen: Thinget
- PLC program controller: Mitsubishi
- Inverter: Mitsubishi
- Photoelectrical controller: Omron
- Proximity switch: Omron
- Other electrical components: Schneider
- Pneumatic component: Airtac
- Pump: Nanfang
- Main motor: Siemens
Number of working positions
rinser 25, filler 25, capper 5
Air supply pressure
Rinsing water pressure
Rinsing water consumption
Main motor power